CeaseFire Clear Epoxy * Patent Pending

Clear Epoxy Flame Retardant and Intumescent Coating

CeaseFire Clear Epoxy is a unique two component clear epoxy fire retardant – intumescent coating based on our proprietary non-halogenated phosphate technology.  All of our phosphates are manufactured in house for our exclusive use.

When exposed to heat and/or fire, CeaseFire Clear Epoxy forms a continuous char foam that protects products from both heat and flame.  The active ingredients in CeaseFire Clear Epoxy   products are not water soluble and will not leach out over time.

CeaseFire Clear Epoxy is recommended for use as a base resin for specialty coatings.  The viscosity is easily reduced by the addition of solvents.  Pigments, anti-settling agents and other flame retardants may also be incorporated.

Specifications:

%Solids                                                100%

Mix Ratio (A:B)                                    100:26

Viscosity Part A@ 25°C                      1600 cps

Viscosity Part B @ 25°C                     200 cps

Working life @ 25°C                           5 hours

Tack free set time @ 25°C                   12 hours

Full Cure @ 25°C                                72 hours

Typical Properties                  5 mil thick coating

Flammability Rating (UL94)                  V-0

ASTM E-84 Flame Spread                  10 (Class A)

ASTM E-84 Smoke Generation           10 (Class A)

Glass Transition Temp              70°C

Hardness Shore D                                72

Peel Strength                                        6.5 lbs/inch

Elongation to break                               12%

Char height                                           over 1/4 inch

Char initiation temp                               220°C

This char foam forms in 20 - 40 seconds.  Once this char layer forms, smoke generation is almost entirely eliminated, the burning ceases, and coated surfaces are insulated.